テイケン

Copyright(C) 2017 TEIKEN CORPORATION. All Rights Reserved.

​PTⅡ Wheel

Large pores make good, small pores make fine

PTⅡ wheels combine performance for reduction of grinding burnings and good performance for metal materials.
PTⅡ is suitable for difficult-to-cut materials, such as stainless and aluminum.

Features

●Structure to suit for grinding metal materials
●Reduction of grinding heat because of good discharging of chips
●Good workpiece tolerance​

User's commnents​

■Thanks to reduction of chip-cloggings and good cutting performance, PTⅡ proovides reducttion of the frequency of

  dressing and grinding time. As a result, grinding capacity doubled.
 [wheel size:1A 760*75*304.8 GC 80 I 14 V 4M, grinding method:cylindrical grinding, workpiece material:SUS303,

  workpiece size:100*1000-1500]

■PTⅡ resolved the problems of chips clogging and dressing frequency, and provided good surface roughness and

  reduction of grinding time at one-tenth.
 [wheel size:1A 350*38*76.2 GC 80 H 15 V 4M, grinding method:cylindrical grinding, workpiece material: SUS304,

  workpiece size:95]

■PTⅡ provides reduced grinding heat, good cutting performance and good surface roughness.
 [wheel size:1A 180*13*31.75 GC 80 H 15 V 4M, grinding method:surface grinding, workpiece material:copper ]

■Thanks to few chip clogging and reduced grinding burning, a workpiece is ground without dressing.
 [wheel size:1A 510*50*127 GC 60 H 15 V 4M, grinding method:surface grinding, workpiece material:ductile 400]

Movies